Screen%20Shot%202021-02-11%20at%2010.19_

1,33x - 65 Adapter

The compact SLR Magic Anamorphot-65 1.33x Anamorphic Adapter is designed to work with lenses with a front element size of up to 65mm in diameter. This 1.33x Anamorphic Adapter sports a rear thread size of 82mm and features an internal focus design. The Anamorphot-65 has a minimum close focus of four feet and can accept 112mm threaded filters and diopters.

The Anamorphot-65 1.33x Anamorphic Adapter is optimized to work with the Fujinon MK zoom range and is also compatible with 82mm-threaded SLR Magic MicroPrimes. Unlike a cropped "anamorphic" image obtained with a spherical lens, this adapter enables you to utilize the total area of your camera's sensor.

Screen Shot 2021-02-11 at 12.00.35 PM.pn

1,33x - 40

(compact)

The SLR Magic Anamorphot-40 1.33x Anamorphic Adapter enables you to capture footage with a 2.35:1 aspect ratio on your camera with a 16:9 sensor. This results in an image that out of the camera will look distorted as if your subjects were stretched taller and thinner than normal. This is easily corrected in the post with virtually any modern NLE, creating an image suitable for viewing on a wide-screen. The SLR Magic Anamorphot-40 1.33x works with lenses that have a front element physically no larger than 40mm in diameter. For full-frame sensors, SLR Magic recommends that the Anamorphot-40 1.33x be used with 40mm or longer focal length lenses; it is compatible with select wider lenses when using S35 and Micro Four Thirds sensors.

The Anamorphot-40 features adjustable focus marked normal and near. The near adjustment allows you to focus on subjects two feet away; setting the adapter to normal allows you to focus on subjects from three feet to infinity. The Anamorphot-40 mounts to lenses with a non-rotating front and a 52mm front filter thread. This adapter is compatible with full-frame and APS-C camera sensors, and with both automatic and manual focus lenses.

Screen%20Shot%202018-03-15%20at%201.51_e

2,0x - 50 Adapter

The SLR Magic Anamorphot-50 2.0x Anamorphic Adapter allows you to expand your creative horizons, enabling you to capture footage with a 2.66:1 aspect ratio on your camera with a 4:3 sensor. The Anamorphot-50 features adjustable focus marked normal and near. The near adjustment allows you to focus on subjects closer than approximately 26' away; setting the adapter to normal allows you to focus on subjects from approximately 26' to infinity. It mounts to lenses with a non-rotating front and a front thread diameter of 62mm. SLR Magic recommends that the Anamorphot-50 2.0x be used with lenses that have a front element that is physically no larger than 50mm in diameter.

Copyright © 2021 SLR Magic. All rights reserved.